.png){kind=logo}
INSTALLATION
Installing your new shades is a straightforward process. Simply determine where the attachment should go, mark the spot, and attach the hardware. An installation kit is available if you don't have your own tool kit handy. If you run into trouble for any reason, just contact us.
Installation Packets
Click on the corresponding picture below to download the installation instructions for the attachment style you chose. No printer? Try printing it at your local library, office store, or email us with your name, address, and order number to get a paper copy mailed to you!
Magnets
A specially designed 2 part bracket holds 4 extra-strong neodymium magnets. One half pins on to your shade, the other adheres to your wall with adhesive tape or small screws.
Grommets & Cup Hooks
Metal reinforced holes in your shade hook onto metal cup hooks which are screwed into the wall. Also a solid attachment style, but a little looser than turn buttons. Click the picture to download your template packet.
Turn Buttons
The base is screwed into your wall, and the grommet side slips over it to attach. This is a solid attachment style, but is permanent. Click on the picture for your template packet.
Clip Rings
Clip these rings onto your plain, no grommet shade at 4-6" intervals and slide them on to your existing curtain rod. No template required!
Grommets & Adhesive Hooks
Metal reinforced holes in your shade slide onto hooks attached to your wall with strong adhesive. Easy to install and removable, the only downside to these is that temperature variations may cause the adhesive to fail. Click on the picture for your template packet.
Cafe Rods
If you would like to use clip rings but don't have existing curtain rods, these adhesive versions are perfectly suited to RVs. They even fit underneath most valences! Click on the picture to shop adhesive cafe rods.